|
Product Name
|
Cooler Fan |
| Model | A4T300S-5DIII-A04 |
| Material | Stainless steel |
| Size | 44x44x17cm |
| Power | AC380V |
| Usage | Air Condition Cooling Fan |
| Voltage | Conventional products: three-phase AC380V/s0Hz, single-phase capacitor motor and cover pole motor AC220V/sOHz, special voltage And frequency, as well as non-generic products, when ordering should Special Note |
| Wind Direction | The conventional product is the suction type: air flows from the motor to the net cover. When reverse is required, the customer should explain the blowing type. |
| Performance Parameters | For a 50Hz fan with the same blade diameter and the same number of poles, whether single-phase or three-phase, the motor shaft power is the same, as shown in the manual. The attached parameter table is measured when the inlet and outlet of the fan are at zero static pressure. The fan noise is the measured value at the outlet of the fan of 1 meter. |
| Air Volume Curve | According to GB/T1236(idt ISO 5801), C-type air duct intake test device, conical inlet nozzle, fan with net cover test. The pressure marked is the inlet static pressure. |
| Operating Temperature | The temperature rise of the motor is measured when the fan is under zero static pressure. When leaving the factory, the temperature rise of the fan is generally controlled below 50K, and the temperature rise of the air cooler is controlled at Below 70K. When the motor insulation level is B. |
2、Simple structure and high efficiency:
The design of axial flow fans is relatively simple, the manufacturing cost is low, and the work efficiency is high. This makes it cost-effective in industrial applications.
3、Versatility:
The axial fan can change the air flow and wind pressure by adjusting the blade Angle or spacing to meet the heat dissipation needs of different industrial occasions. In addition, it can be combined with other cooling devices to form a more efficient cooling system.
4、High reliability:
Industrial axial flow cooling fans are usually made of high-quality materials and manufacturing processes, with high durability and stability. In long-term, high-load industrial applications, it can maintain stable performance and reduce failure rates.
Application
1、Industrial production:
In steel, chemical, electric power and other industries, a large number of soot, harmful gases and heat need to be processed through ventilation equipment. Axial fans are widely used in flue gas emission, hot air circulation and waste gas treatment systems in these industries because of their high air volume and high air pressure.
2、Building ventilation:
In large commercial buildings, industrial plants and office buildings, axial fans can be used for the design and operation of building ventilation systems. By setting axial fans reasonably, indoor air circulation and fresh air introduction can be realized, indoor air quality can be improved, and comfortable working and living environment can be provided.
3、Agricultural greenhouse:
Greenhouse cultivation requires control of environmental parameters such as temperature, humidity and carbon dioxide concentration. The axial fan can adjust the climate conditions in the greenhouse through air convection, providing a good growth environment for plants.
4、Heat dissipation of electronic equipment:
In the field of electronic equipment, such as server rooms, data centers and other occasions, the equipment will generate a lot of heat during operation. Axial fans can take the heat away by means of forced convection, keeping the equipment operating within a safe operating temperature range.
